130
inserted or copied and pasted, new nodes will have the same User Name and
Password as existing nodes. The defaults are "admin" and "mircom".
• BACnet
o Enable - If checked, the Node will run a BACnet (Building Automation and
Control Networks) Server. This option becomes available only after the Web
Services activation using the "Activate BACnet Services" button.
o Activate BACnet Services – This button allows BACnet Services license
transfer from the CodeMeter Security Key into the current job. This button
will disappear after BACnet Services license activation.
o Model Name: read only, BACnet Model Name
o Description: read only, BACnet Description
o Location: BACnet Location. Defaults to the first 25 characters of the Job
Name, but can be overridden.
o Device Name: read only, BACnet Device Name.
o Device ID: the BACnet ID for the entire fire alarm system (In BACnet
terminology, the Device).
o Vendor Name: read only.
o Vendor ID: read only.
o App Version: read only, configurator version.
o Base ID: The starting ID for all BACnet objects. These are the circuits, switches
and system statuses of the configured job.
Walk Test Areas
The list view displays the Walk Test Areas. This view allows User to configure walktest areas
to be loaded to the panel. Top right panel within the view holds walktest names and
sequence number, and bottom right panel is using to define the walktest relationship.
From the view the user can right click anywhere in the upper right pane to add a new Walk
Test Area (Dialog will be called prompting User to enter a walktest area Name), or delete an
existing one. If the user right clicks on an existing Walk Test Area, the pop up menu includes
an option to add a walktest relationship (Add Input Devices Menu option). New entered
walktest name will be added at the end of the list. Walktest sequence number is not
editable, it is auto generated by the Configurator starting from 1. User can edit existing
walktest name or copy the name.
To Next Page
Loading...
Need help?
General
