Mircom FX-MNS-6000 User Manual

12
Add UDACT
Add UDACT capability to the selected network node.
Context
Dependent
Add Device
If the
selected tree item is a device loop, add a device or circuit.
Add Message
If the selected tree item is the Custom Messages branch of a remote
annunciator, add a Message.
Add Zone
If the selected tree item is the Input Zones branch of a CPU (QLA or Base I/O
of a Master), add a zone.
Add Group
If the selected tree item is Output Zones branch of a CPU (QLA or Base I/O
of a Master), add a group.
Add
Correlations
If the selected tree item is Zone, Group, Status, or Device, or a Display Item
that can have
correlations, launch a dialog that allows correlations to be
added to the selected item. This does not apply to items selected in the
Input Summary or Output Summary.
Note: Most of these options may also be accessed by right clicking on the appropriate item
in any of the configurator windows.
Job Menu
The Job Menu contains the following commands:
Name Short cut Description
New Job Ctrl-N;
This command will open the Create Job
dialog which will allow you
to start a new job. The new job can be based on a supplied
template or on the job currently open in the configurator.
Open Job Ctrl+O
This command opens a dialog from which you can select any job
or job version that is in your database.

Mircom FX-MNS-6000 Specifications

General

Brand	Mircom
Model	FX-MNS-6000
Category	Fire Alarms
Language	English