174
C
ONFIGURING WITH WEBADMIN
CHAPTER 5 CONFIGURATION
The WebAdmin setup wizard takes you step by step through the setup of a basic configuration and is suit-
able for initial communication server setup. The setup wizard is automatically called up when a new
communication server is installed. Logging on as administrator in WebAdmin (expert or default mode)
allows you to also start the setup wizard directly from the WebAdmin navigation tree.
The setup wizard comprises the following steps:
1.
Activating licences
2. Viewing the IP addressing
3. Configuring media resources
4. Setting up the numbering plan
5. Setting up SIP providers
6. Setting up users, terminals and DDIs
7. Setting up the auto attendant
For each step you can display a help page or see it in the lower part of the window where it is already
displayed. You can skip individual steps of the setup wizard or exit the setup wizard at any time in order
to return to the WebAdmin start page.
Configuration assistant
The configuration assistant goes further than the setup wizard and helps you to configure a communica-
tion system in sequence, from scratch. Logging on as administrator in WebAdmin (expert or default mode)
allows you to display the configuration assistant on the WebAdmin start page.
The configuration assistant comprises the following steps:
1.
Viewing the IP addressing
2. Regulating access control
3. Checking licences
4. Configuring media resources
5. Setting date
6. Checking network interfaces
7. Setting up SIP providers and accounts
8. Specifying user permissions
9. Create users and DDI
1
numbers
10. Checking outgoing routing
11. Setting up the auto attendant
12. Setting up music on hold
13. Setting up an announcement service
14. Entering abbreviated dialling contacts
To Next Page
Loading...
Need help?
General
