Mitel SMB Controller User Manual

202
D
ISPLAY AND CONTROL PANEL
CHAPTER 6 OPERATION AND MAINTENANCE
Shut-down mode
If, for maintenance purposes, the SMB Controller should be disconnected from the power supply, it must
be shut down in a controlled manner. This means, the applications need some time to save their data and
to close. When the shut-down mode is reached, the SMB Controller will remain in this mode for 1.5
minutes before it starts up again automatically. During this period, the SMB Controller can be discon-
nected from the power supply without concerns.
NOTE: Never disconnect the SMB Controller from the power supply to trigger a restart. This can result in
data losses and prevent a restart.
Combination pattern [17] is displayed in shut-down mode.
Enter shut-down mode
Requirement:
[11] ~2s Press
pilot
key to
start
emer-
gency
mode
[12] ~2s Confir
matio
n
[13] ~60 Loadi
ng
SMB
Contr
oller
Emer-
gency
softw
are
[14] SMB
Contr
oller
is in
emer
gency
mode
Table 6.8:Enter emergency mode (Continued) (Sheet 2 of 2)

Mitel SMB Controller Specifications

General

Brand	Mitel
Model	SMB Controller
Category	Controller
Language	English