180
W
EBADMIN CONFIGURATION NOTES
CHAPTER 5 CONFIGURATION
• LCR
• Blacklist
• CLIP based routing
• Data backup
NOTE: You can activate the Replace existing configuration option with the import function. Activate
this function only if you are setting up the communication server from scratch. This action deletes
all previously configured user data and all user associated settings such as DDI numbers, CDE
targets, user group entries, assigned phones, configured keys, etc.
Mitel 6800/6900 SIP phones
Prior to the registration, reset any phones that were already in operation back to the factory setting. For
security reasons, delete the phone's MAC address in WebAdmin. This prevents problems during regis-
tration.
Use these procedures in the following cases:
• Assigning the phone to another user on the same system
• Transferring the phone to another system with the same software release
• Changing the software release to an earlier release
• Changing the communication server IP address
To Next Page
Loading...
