40
A
PPLICATIONS AND APPLICATION INTERFACES
CHAPTER 2 SYSTEM OVERVIEW
TIP: You will find the MAC address of your communication server in IP network / IP addressing ( =9g)
of WebAdmin.
5. Choose your communication server from the list, and when prompted, enter the Registration user
name and the Registration password.
The phone registers with the communication server. If a new phone software is available, the
phone automatically updates and restarts.
Register a MiVoice 5300 IP system phone
1.
Add one ore more expansion key module(s) to the phone.
2. Connect the phone to the IP network and to the power supply using the optional power adapter. If
your IP network supports PoE, no power adapter is required.
3. On the phone, keep the C-key pressed down to access the local Administration menu.
4. Set the static IP address of the communication server (Administration / PBX settings / PBX address).
To change the settings you have to enter the administrator password first (default = 0000).
5. Restart the phone and enter the call number of the user you want to allocate to this phone as Regis-
tration code.
– The phone registers on the communication server. If a new phone software is available, it is
automatically updated and the phone restarts again.
Connect the digital system phones MiVoice 5300
1.
Add one ore more expansion key module(s) to the phones.
2. Connect the phones to the DSI interfaces on the front panel. Connect the phones in the same order
as you have set them up in the previous chapter and start with the lowest port number.
3. The phones are registered and allocated to their phone data instance in the communication server.
If you keep the suggested order, the phone type matches with the configured terminal type. You
can fix a terminal mismatch in the WebAdmin terminal view.
Test your configuration
Now you are able to make internal calls between the phones you connected to your communication
server. Do some calling tests between the different phone types and check the audio. In the documenta-
tion set you will find the user’s guides to your phones.
Make further configurations
Congratulations, you have set up the communication server for self training purposes. Now you have a
perfect configuration platform to learn more about the communication server, its features and expansion
possibilities.
For further configurations, use the WebAdmin configuration assistant and the online help. For detailed
information, see the user’s guides and system manuals (part of the Documentation set).
To Next Page
Loading...
Need help?
General
