Mitel SMB Controller User Manual

57
S
YSTEM CAPACITY
CHAPTER 3 EXPANSION STAGES AND SYSTEM CAPACITY
The assignment to the RJ45 sockets depending on the wiring adapters is shown in Combinations of wiring
adapters / interface cards.
System capacity
System capacities are defined on the one hand by the existing hardware with its expansion possibilities
and on the other by the limits set in the software. The software limits can be partly expandable by licences.
WA-TS0 TIC-4TS, TIC-2TS Included in the equipment
supplied with the interface cards
WA-TS1 TIC-4TS, TIC-2TS must be ordered separately
WA-2W
1
TIC-4AB
a
, TIC-2AB
a
,
b
ETAB4,
EADP4
Included in the equipment
supplied with the interface cards.
WA-1PRI
TIC-1PRI
a
Included in the equipment
supplied with the interface card
WA-8DSI
2
8DSI
b
Included in the equipment
supplied with the interface card
1. Must not be used in USA/Canada.
2. Not yet supported with Release 6.0
Table 3.13:Wiring adapter (Continued) (Sheet 2 of 2)

Mitel SMB Controller Specifications

General

Brand	Mitel
Model	SMB Controller
Category	Controller
Language	English