219
O
PERATIONS SUPERVISION
CHAPTER 6 OPERATION AND MAINTENANCE
MiCollab: Terminal
limit has been reached
A MiCollab terminal could not be
linked to a user because a limit has
been reached (reason).
reason = 0: Too much terminals per
system
reason = 1: Too much terminal per
user
reason = 2: Too much MiCollab
clients per user
User number,
rea-son, date,
time
Serious (negative,
with match)
MiCollab: Within the
terminal limits again
A MiCollab terminal could now be
linked to a user because it is within
a limit again (reason).
reason = 0: Terminals per system OK
again
reason = 1: Terminal per user OK
again
reason = 2: MiCollab clients per
user OK again
User number,
reason, date,
time
Serious (positive,
with match)
Mitel Dialer within the
licence limit again
Mitel Dialer user licences are now
available again.
Date, time Serious (positive,
with match)
Mitel SIP terminals
within the licence limit
again
Mitel SIP Terminals and Mitel 8000i
Video Options licences are now
available.
Parameter
1=1: Mitel SIP
Terminals
licence,
Parameter
2=1: Mitel
8000i Video
Options
licence, date,
time
Serious (positive,
with match)
Monitor event Monitor event Monitor Type,
Date, Time
Normal (without
match)
No configuration
template
A configuration template for a Mitel
SIP terminal is missing in the
communication server file system.
Without the configuration
template, no configuration file can
be generated for this terminal type.
No
configuration
template,
date, time
Serious (negative,
with match)
No DECT DSP channels
available
DECT channels on DSP-0x
overloaded
Date, time Normal (without
match)
Table 6.12:Event types, in alphabetical order (Continued) (Sheet 12 of 25)
To Next Page
Loading...
