Mitel SMB Controller - Page 229

221
O
PERATIONS SUPERVISION
CHAPTER 6 OPERATION AND MAINTENANCE
Outgoing call rejected Call rejected by the network
• On any line: error code 34
• On required line group: error
code 44
Port number
of the
exchange line
circuit, cause,
date, time
Normal (without
match)
Overheat (Mitel
415/430 and Mitel
SMBC only)
The temperature inside the
communication server is too high.
The appropriate measures must be
taken immediately to improve the
heat dissipation, e.g. by providing
the required clearances, lowering
the ambient temperature or
installing the fan from the
rack-mounting set (Mitel 430 only).
Card number,
temperature,
date, time
critical (negative,
with match)
Table 6.12:Event types, in alphabetical order (Continued) (Sheet 14 of 25)