Mitsubishi F700 Series User Manual

307
Useful functions
4
PARAMETERS
(3) Parameter setting mode
Flickers
Always displayed as "0" when the
parameter is read.
Write "1 or 2" to select the automatic
setting. Pressing in the "0" setting
displays the next parameter.
Example
Example
<Automatic parameter setting mode>
(Lit)

Mitsubishi F700 Series Specifications

General

Humidity	95% RH or less (non-condensing)
Control Method	V/F control
Protection Features	Overcurrent, overvoltage, undervoltage, overheat, short circuit
Communication Options	RS-485
Operating Temperature	-10°C to +50°C
Storage Temperature	-20°C to +65°C
Altitude	Up to 1000m above sea level
Overload Capacity	150% for 60 seconds
Cooling Method	Forced air cooling
Power Range	0.75 to 630 kW (1 to 845 hp)
Output Voltage	3-phase 200 to 240 VAC, 380 to 500 VAC (matching input voltage)