M800S/M80/E80 Series Connection and Setup Manual
31 Device Open Parameter Screen
550
IB-1501269-J
Menu for inputting the data type
Menu Details
Input "BYTE" to the data type.
When the display format is BIT format, it will be changed to the desimal format with sign.
Input "WORD" to the data type.
When the display format is BIT format, it will be changed to the desimal format with sign.
Input "DWORD" to the data type.
When the display format is BIT format, it will be changed to the desimal format with sign.
Input "WORD(BIT)" to the data type.
Display format will be changed to the BIT format.
Copy the data of a line where a cursor is placed.
Writes the contents of the data copied (one line) into the line where the cursor is placed.
If the data of the line is changed after the [Line copy] is pressed, the data before change will be written when
pasting it.
Once the line is copied, it can be pasted many times until new area is copied.
Clears all allocation of the parameter in the device open parameter screen.
(Note) Data of the group detail will not be cleared.
When parameter No. is set and press [INPUT] key, the group will be displayed with the parameter No. set is
a top of the group.
A cursor moves to the line of the target group.
The group detail screen corresponding to the group where a cursor is placed will be displayed.
When the group where a cursor is placed is not set, it will be invalid.
To Next Page
Loading...
Need help?
General
