Mitsubishi M80 series User Manual

M800S/M80/E80 Series Connection and Setup Manual
32 SRAM Open Parameter Screen
552
IB-1501269-J
SRAM open area for a machine tool builder can be set or changed.
It can be divided according to the machine tool builder's usage, and the display format and the data format can be
switched for each divided area (hereinafter called a group).
(1)
(5)
(2)
(3)
(4)

Mitsubishi M80 series Specifications

General

Type	CNC Control Unit
Power Supply	24V DC
Interpolation	Linear, circular, helical
Fieldbus	CC-Link
Operating Temperature	0 to 45°C
Interface	USB, RS-232
Processor	RISC processor
Ethernet	Yes (100BASE-TX/10BASE-T)