Moeller DF51 - Page 176

Serial interface (Modbus)
10/05 AWB8230-1541GB
172
10B6 b022 Tripping current for motor
current limitation
rw 0.1 – 1.5 x I
e
for DF51
0.2 – 1.5 x I
e
for DV51
Default, dependent on frequency inverter’s rated
current (Ie)
0.01 [A]
10B7 b023 Motor current limitation,
deceleration time constant
rw 0.1 – 3000 s 0.1 [s]
10B8 b024 Reserved rw – –
10B9 b025 Reserved
rw – –
10BA b026 Reserved
rw – –
10BB b028 Motor current limitation,
limit current selection
rw 00: Value of PNU b022 –
01: Analog input O-L
10BC b031 Parameter access inhibit
(access rights)
rw 00: Access to all parameters except PNU b031
disabled when digital input SFT is enabled
(a PNU C001: 15)
–
01: Access to all parameters except PNU b031
and F001 (A020, A220, A021 to A035,
A038) disabled when digital input SFT is
enabled (a PNU C001: 15)
02: Access to all parameters except PNU b031
disabled
03: Access rights to all parameters except
PNU b031 and F001 (A020, A220, A021 to
A035, A038) disabled
10: Extended access rights to parameters in
RUN mode.
10BD b032 Reserved
rw – 1 [%]
10BE b034 Reserved
rw – –
10BF b035 Reserved
rw – –
10C0 b036 Reserved
rw – –
10C1 b037 Reserved rw – –
10C2 b040 Reserved rw – –
10C3 b041 Reserved rw – –
10C4 b042 Reserved
rw – –
10C5 b043 Reserved
rw – –
10C6 b044 Reserved rw – –
10C7 b045 Reserved rw – –
10C8 b046 Reserved rw – –
10C9 b050 Reserved
rw – –
10CA b051 Reserved rw – –
10CB b052 Reserved rw – –
10CC b053 Reserved rw – –
10CD b053 Reserved
rw – –
10CE b054 Reserved
rw – –
10CF b080 Analog output AM, gain
factor
rw 0 – 255 1 [%]
Holding
register
Function
code
Name Access
rights
Value range Manipulated
variable
hex