Moeller MV4 Series - Festo

Communications Card Description ZB4-601-IF1, ZB4-609-IF1 4-30
Moeller 07/01 AWB-C2700-1347GB
8.9 Festo
FESTO
PLC Type Protocol PLC Port Parameters
FPC405
Commando
Interpreter
DIAG-Port 9600 baud, 8 data bits, 1 stop bit, no parity
DRIVER DESIGNATION (10, 2) : OTHERS > FPC405 (MPB.BIN)
SUPPORTED DATA TYPES : R, MW
WIRING LIST
RS 232
Signal Pin Pin Signal
RxD 2 3 TxD
TxD 3 2 RxD
SG 5 5 SG
ZB4-601/609-IF1 DIAG-Port
(9 pole male) (9 pole male)
NOTES
• The ZB4-601/609-IF1 is connected to the FPC405 directly via the DIAG port. Active communication
should be possible without any further steps.
• The PLC must be switched on and in Run status.