Device Description MV4-570-TA1/2, MV4-590-TA1/2 2-4
Moeller 07/01 AWB-C2700-1347GB
1 Introduction
The MV4 Touch Operator Panels are visualisation units provided with touch zone functions for medium to
high complexity automation systems, meeting all the requirements placed on a modern visualisation unit.
The Touch Operator Panels must be loaded before use with the appropriate project data. This is stored in
the external plug-in memory card (PC card). The memory card in the MV4 can be loaded with project data
via a download or directly on the PC (PC card slot). The project data is created using the MV4-CFG-1
configurator software (Galileo).
The Touch Operator Panels provide two slots for communication modules (see Section 11). The
communication card handles the connection to the automation system. They are described in Part 4 and 5.
This device description is a reference for technical data, information on installing, terminals, commissioning
and operating of the MV4-570-TA1/2(-xx1) and MV4-590-TA1/2(-xx1) device versions. The illustrations in
this documentation refer to the 10.4″ Versions (see Section 2), unless otherwise noted. Lettering and
function of the terminals and indicators are the same for all device versions.
2 Device version
Type designation Display size Display technology Resolution Supply voltage
MV4-570-TA1(-xx1)
10.4″ (264 mm)
LCD active color
(TFT)
VGA (640 x 480) 24 V DC
MV4-570-TA2(-xx1)
10.4″ (264 mm)
LCD active color
(TFT)
VGA (640 x 480)
100 to 240 V AC,
50/60 Hz
MV4-590-TA1(-xx1)
13.8″ (351 mm)
LCD active color
(TFT)
VGA (640 x 480) 24 V DC
MV4-590-TA2(-xx1)
13.8″ (351 mm)
LCD active color
(TFT)
VGA (640 x 480)
100 to 240 V AC,
50/60 Hz
Units with the extention –xx1 are equipped with an acid-proof stainless steel front. The standard devices
have an aluminium front.
To Next Page
Loading...