Device Description MV4-150-TA1, MV4-450-TA1, MV4-170-TA1, MV4-470-TA1 1-18
Moeller 07/01 AWB-C2700-1347GB
9 Data transfer (Download Button)
The Touch Operator Panel basic function is used to load the runtime program. This runtime program
(GRSW) contains the function for loading project data, and so this program must be loaded before the
loading of project data is possible.
Pressing the Download button calls up the functions for loading project data and/or the Runtime (Download)
(see Section 9.1 / 9.2).
The Download button is located on the rear of the Touch Operator Panel:
9.1 Loading the runtime (GRSW)
The “APPLICATION LOADER”. system mask will appear when the system is started. This application loader
is a fixed part of the firmware (basic function). When the system is started the application loader searches for
the runtime. This is indicated by the system message “search program...”. The message “ok” will appear
when the runtime program is found.
The integrity of the runtime program is then checked, and is indicated by the system message “check
GRSW.EXE” with date and time. If the runtime program is correct, the “ok” system message will appear and
the runtime program is started.
System mask “APPLICATION LOADER”
MAINBOARD FIRMWARE VERSION 3.XX (WIN32)
> APPLICATION LOADER <
----------------------------------------
- search program .. ok
- check GRSW.EXE
XX/XX/XX XX:XX .. ok
To Next Page
Loading...