Moeller MV4 Series - 7 Connecting the System Power Supply; System Power Supply AC (100

Device Description MV4-670-TA1/2, MV4-690-TA1/2 3-14
Moeller 07/01 AWB-C2700-1347GB
7 Connecting the System Power Supply
7.1 System power supply AC (100...240VAC 50/60Hz)
Type MV4-670/690-TA2(-xx1)
The system power supply for the MV4 uses an inlet socket. The protection fuse is integrated in the inlet
socket and can be exchanged without having to open the device.
Normal safety standards and the specific local regulations must be observed when connecting the Panel.
Terminal Signal
N Neutral conductor
PE Protective Earth
L Live conductor
Section of connector panel for the AC version of the
MV4. View of the connector socket for the system
power supply with integrated fuse (1.0A slow).
The PE conductor must be permanently and securely connected to the PE conductor
of the power supply.
L PE N