Device Description MV4-670-TA1/2, MV4-690-TA1/2 3-23
Moeller 07/01 AWB-C2700-1347GB
15 Memory Card Slot
The MV4-600 provides two slots (memory card slot A and B) for memory cards (PC card).These memory
cards store the project data required for running the MV4-600. The project data is created on the PC with the
appropriate MV4-Configurator (GALILEO). If the PC has a PC card drive, the project data can be transferred
directly to the memory card. The memory card only then needs to be fitted into the memory card slot of the
MV4-600. The application can then be started up by switching on the system power supply.
Further information on this is provided in the documentation of the MV4 runtime system (GRS, Galileo
runtime system).
The memory card is not supplied with the MV4-600.
View of the memory
card slots of the
MV4-600.
Use the card retaining plate supplied to prevent the memory card from falling out of
the MV4!
Without this card retaining plate a secure fitting of the memory card in the slot cannot
be guaranteed, particularly with the typical vertical mounting of the device.
Card retaining plate for
the memory card slot of
the MV4-600.
To Next Page
Loading...