Device Description MV4-670-TA1/2, MV4-690-TA1/2 3-21
Moeller 07/01 AWB-C2700-1347GB
13 Communication Cards and System Slot
The MV4-600 provides two slots (System slot) for communication cards (→
→→
→ Section 21). The link to the
automation equipment (e.g. PLC) or the fieldbus system is implemented using one of the several
communication cards available.
Communication cards in the SYSTEM SLOT of the MV4-670-TA1
Safety precautions concerning electrostatic discharge (ESD) must be observed when
handling the cards
Never plug in the communication cards with the power supply switched on.
Only operate the communication cards once they have been fully screwed into position.
Do not run any non-Micro Innovation components in the slots. Only original hardware
from Moeller may be used.
Refer to the relevant card description for information on communication cards,
protocols, configuration, cable lengths etc.
To Next Page
Loading...