Moeller MV4 Series - Moeller PS40

Communications Card Description ZB4-601-IF1, ZB4-609-IF1 4-52
Moeller 07/01 AWB-C2700-1347GB
9.4 Moeller PS40
The interface to Moeller PLCs is described in the manual AWB-C2700-1349GB.
Moeller PS40
PLC Type Protocol PLC Port Parameter
PS4-141
PS4-151
PS4-201
PS4-341
PS416
Suconet K Suconet K
SBI (PS416)
375 kbaud or 187.5 kbaud
DRIVER DESIGNATION ALT : PS4-141-MM1 > Suconet K (PS40.BIN)
DRIVER DESIGNATION ALT : PS4-151-MM1 > Suconet K (PS40.BIN)
DRIVER DESIGNATION ALT : PS4-201-MM1 > Suconet K (PS40.BIN)
DRIVER DESIGNATION ALT : PS4-341-MM1 > Suconet K (PS40.BIN)
DRIVER DESIGNATION ALT : PS416 > Suconet K (PS40.BIN)
SUPPORTED DATA TYPES : M, MB, MW, (MD with PS4-341-MM1 and PS416)
WIRING LIST
RS 485 RS 485
Signal Pin Pin Signal
A3 4A
SG 5 3 SG
B7 1B
ZB4-601/609-IF1 PS4-XXX
(9 pole male) (5 pole DIN male)
Signal Pin Pin Signal
A3 3A
SG 5 5 SG
B7 7B
ZB4-601/609-IF1 PS416
(9 pole male) (9 pole male)
Type: ZB4-231-KB1 Type: ZB4-233-KB2
NOTES
• Devices with the ZB4-601/609-IF1 card are incorporated in the Suconet network configuration under the
general name “MV4” (Suconet Identifier A060).
• The number of Suconet data bytes and the station number of these devices can be parameterised in the
network configuration and must match the settings in the design software:
Sucosoft Topology Configuration Design software
Station number = MMI Station No.
Receive data = Send Buffer
Send data = Receive Buffer
Example configuration with corresponding user data:
Receive data 13 21 37 69
Send data 10 18 34 66
= User data 8 163264