Moeller MV4 Series - Page 28

Device Description MV4-150-TA1, MV4-450-TA1, MV4-170-TA1, MV4-470-TA1 1-25
Moeller 07/01 AWB-C2700-1347GB
Dimensions
Front
5.7″ device
220 x 170 mm
10.4″ device
342 x 270 mm
Rear
5.7″ device
201 x 144 x 83 mm
10.4″ device
310 x 240 x 81 mm
System supply
Rated voltage SELV 24 V DC, Safety extra-low voltage (see Sec. 6)
Voltage range 24 V DC to EN 61131-2
20.4 to 28.8 V DC effective,
absolute value with ripple 18.5 to 30.5 V
35 V DC for < 100 ms
Voltage dips 5 ms max., at 20.4 V DC to 0 V DC, repetition rate 1 s
Reverse polarity protection Yes
Isolation No
0 V and PE connection to housing potential
Power consumption
5.7″ device
0.7 A (normally)
(incl. comms. card)
10.4″ device
0.7 A (normally)
Inrush current 1.5 A
2
s
Current consumption
5.7″ device
20 W
(incl. comms. card)
10.4″ device
20 W
Fuse protection
Internal 2.5 A slow, to EN 60127-2/2
(externally accessible, see Section 6)
Maximum disconnection
capacity
35 A (see Section 6)
Interfaces
1 slot for communications card (see Section 10)