Device Description MV4-150-TA1, MV4-450-TA1, MV4-170-TA1, MV4-470-TA1 1-2
Moeller 07/01 AWB-C2700-1347GB
Proper use
The device must only be used for the applications described in this device description and only in conjunction
with the components recommended by Moeller.
Warning !
For the trouble-free and reliable operation of this product proper transport, storage,
assembly and mounting, as well as careful operation must be ensured.
Do not switch on the device when it is covered with condensation. When changing its
location from a cold to warm area, allow the device to acclimatise to the new conditions
before commissioning.
No warranty claims will be accepted for faults arising from the improper handling of the
device.
The device should not be used for the implementation of any safety functions relating to
the protection of personnel and machinery.
No liability is accepted for claims for damages arising from a failure or functional defect
in the device.
All data specified in this document does not represent legally binding guaranteed
specifications.
Safety instructions for the user
This device description contains the information required for the proper use of the
products described therein. Sections 1 to 12 are aimed at technically qualified persons
and sections 13 to 19 at persons requiring no specific technical qualification.
Qualified persons in relation to the safety instructions in this device description or the
product itself are persons who:
are either design personnel familar with the safety concepts of automation,
or are operating personnel who are instructed in the handling of automation systems
and have a good knowledge of the contents of this device description relating to
operation,
or are commissioning and service personnel that have been properly trained and
authorised in the repair of such automation devices, and to commission circuit
components or systems in accordance with the relevant safety standards.
To Next Page
Loading...