Device Description MV4-670-TA1/2, MV4-690-TA1/2 3-2
Moeller 07/01 AWB-C2700-1347GB
Proper use
The device must only be used for the applications specified in the device description and only in conjunction
with the components recommended by Moeller GmbH.
Warning
The trouble-free and safe operation of the product is only possible if the requirements for proper
transport, storage assembly, installation and careful operation are fulfilled.
The device must not be switched on when it is covered with condensation. When changing its
location from cold to warm the device must be allowed to acclimatise to the new conditions before
commissioning.
No warranty claims will be recognised for faults arising from the improper handling of the device.
The device should not be used for the implementation of any safety functions relating to the protection of
personnel and machinery.
No liability is accepted for claims for damages arising from a failure or functional defect in the
device.
All data specified in this document does not represent guaranteed specifications in the legal sense.
Safety instructions for the user
This device description contains the information required for the proper use of the products
described therein. Sections 1 to 14 address technically qualified personnel and sections 15 to 22
address personnel not requiring any technical knowledge.
Qualified personnel in the sense of the safety instructions given in this device description or on
the project itself are persons who:
- as engineering personnel are either familiar with the safety concepts of automation,
- or as operating personnel, are instructed in the use of automation components and are
familiar with the contents of this device description relating to the operation of the device,
- or as commissioning or service personnel are suitably trained for the repair of
automation devices and are authorised to commission circuits and device/systems in
accordance with standard safety engineering principles.
To Next Page
Loading...