Device Description MV4-670-TA1/2, MV4-690-TA1/2 3-28
Moeller 07/01 AWB-C2700-1347GB
System supply
Rated voltage MV4-...-TA2-... 100...240 VAC, 50/60 Hz
MV4-...-TA1-... 24 VDC SELV,
safety extra low voltage
(→
→→
→ Section 6)
Voltage range MV4-...-TA2-... 85...264 VAC, 48...62 Hz
MV4-...-TA1-... 24 VDC to DIN 19240
20.4...28.8 VDC effective, absolute
value with ripple 18.5...30.2 VDC
35.0 VDC for a duration of < 100ms
Voltage dips MV4-...-TA1-... 5 ms max., at 20.4 VDC to 0 VDC,
repetition rate 1 s
Protection against reverse
polarity
Yes
Potential isolation MV4-...-TA2-... Yes
MV4-...-TA1-... Yes
Current consumption MV4-...-TA1-... 1.4 A (normal)
Maximum inrush current MV4-...-TA2-... 32 A at 230 VAC, 17 A at 110 VAC
MV4-...-TA1-... 3.0 A
2
s
Power consumption Approx. 30 W
Fuse protection
Inside the unit MV4-...-TA2-... 1 A slow
(accessible from outside,
→
→→
→ Section 7.1)
MV4-...-TA1-... 4 A slow, to EN 60127-2/2
(accessible from outside,
→
→→
→ Section 7.2)
MV4-...-TA2-... 35 AMaximum disconnection
capacity MV4-...-TA1-... 10 A
System slot
Number 2
Network
Type Fast Ethernet 100Base-TX IEC 802.3u (100 MBit/s)
Ethernet 10Base-T IEC 802.3 (10 MBit/s)
Connection RJ45 female
Transmission rate 10/100 MBit/s
Parallel port
Type
Centronics compatible, not potential-free (→
→→
→ Section 9)
Connectors Sub-D 25 pole female
System port
Type
RS 232, not potential-free (→
→→
→ Section 11)
Connection Sub-D pole male
Memory card slot
PC card to JEIDA/PCMCIA Type I or Type II
Technology Linear flash, 5V/5V or 5V/12V
ATA flash
To Next Page
Loading...