Moeller MV4 Series - Page 97

Communications Card Description ZB4-601-IF1, ZB4-609-IF1 4-18
Moeller 07/01 AWB-C2700-1347GB
SIEMENS
PLC Type Protocol PLC Port Parameters
S5-103
R3964R CP521-SI 9600 baud, 8 data bits, 1 stop bit, parity even
DRIVER DESIGNATION (3, 4) : SIEMENS > CP521-SI (MPB.BIN)
SUPPORTED DATA TYPES : DW
WIRING LIST
RS 232 TTY
Signal Pin Pin Signal
RxD 2 2 TxD
TxD 3 3 RxD
SG 5 7 SG
ZB4-601/609-IF1 CP521-SI
(9 pole male) (25 pole male)
Signal Pin Pin Signal
IN 1 18 OUT+
SG 5 21 OUT-
9IN+
OUT 9 10 IN-
ZB4-601/609-IF1 CP521-SI
(9 pole male) (25 pole male)
NOTES
• The AG103 with the CP521-SI supports the R3964R protocol.
• An interpreter with a scaled-down version of DK512 (max 4 data byte) can be obtained for this PLC from
Moeller.
• If the interpreter is implemented in the PLC (see appropriate documentation), the ZB4-601/609-IF1 is
capable of implementing RECEIVE and FETCH jobs as with the CP524.
• The PLC must be in Run status for active communication.
• If both data blocks or data words are addressed that are not available in the PLC, this will cause errors in
the communication.