Settings 7 - 3
Figure 7-2
Enter PIN Screen
2. Enter a PIN (between 4 and 16 characters) then touch OK.
3. Re-enter PIN and then touch OK.
4. Touch Use tactile feedback to enable vibration when the user enters PIN.
5. Touch Home. The next time the MC40 goes into suspend mode a PIN is required upon waking.
Figure 7-3
PIN Screen
Set Screen Unlock Using Password
To set the MC40 to have the user enter a password:
1. Touch
> Settings > Location & security > Set up screen lock > Password.
To Next Page
Loading...
Need help?
General
