CHAPTER 9 MAINTENANCE &
TROUBLESHOOTING
Introduction
This chapter includes instructions on cleaning and storing the MC40, and provides troubleshooting solutions
for potential problems during MC40 and accessory operation.
Maintaining the MC40
For trouble-free service, observe the following tips when using the MC40:
•
Do not scratch the screen of the MC40. When working with the MC40, use finger or stylus intended for
use with capacitive touch screens. Never use an actual pen or pencil or other sharp object on the surface
of the MC40 screen.
•
The screen of the MC40 is glass. Do not to drop the MC40 or subject it to strong impact.
•
Protect the MC40 from temperature extremes. Do not leave it on the dashboard of a car on a hot day,
and keep it away from heat sources.
•
Do not store or use the MC40 in any location that is dusty, damp, or wet.
•
Use a soft lens cloth to clean the MC40. If the surface of the MC40 screen becomes soiled, clean it with
a soft cloth moistened with a diluted window-cleaning solution.
•
Periodically replace the rechargeable battery to ensure maximum battery life and product performance.
Battery life depends on individual usage patterns.
Battery Safety Guidelines
•
The area in which the units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non commercial
environment.
•
Follow battery usage, storage, and charging guidelines found in Chapter 1, Getting Started.
•
Improper battery use may result in a fire, explosion, or other hazard.
To Next Page
Loading...
Need help?
General
