Motorola MC40 - Screen Unlock Using Pattern

7 - 4 MC40 Integrator Guide
Figure 7-4 Enter Password Screen
2. Enter a Password (between 4 and 16 characters) then touch OK.
3. Re-enter Password and then touch OK.
4. Touch Use tactile feedback to enable vibration when the user enters password.
5. Touch Home, The next time the MC40 goes into suspend mode a Password is required upon waking.
Figure 7-5 Password Screen
Screen Unlock Using Pattern
To set the MC40 to have the user enter a pattern:
1. Touch > Settings > Location & security > Set up screen lock > Pattern.
2. Touch to view instructions on the screen. Watch pattern example and then touch OK.