Administrator Utilities 6 - 3
Figure 6-2
User Manager Window
2. In the Username text box, enter a user name. The text is case sensitive and required.
3. In the Password text box, enter a password for the user. The text is case sensitive and required.
4. In the Retype Password text box, re-enter the user password.
5. Select the Admin checkbox to set the user to have administrator rights.
6. Select the Enabled checkbox to enable the user.
7. Click OK.
8. Repeat steps 1 through 7 for each additional user.
Add Packages
Create a list of applications (packages) installed on the MC40 that are available for use by all the users.
1. Click + next to Packages.
Figure 6-3
Package Information Window
2. In the Package name text box, enter the name of an application.
3. Click OK.
NOTE To get a list of all the applications (packages) on the MC40 see Determining Applications Installed on
the MC40 on page 6-12.
To Next Page
Loading...
Need help?
General
