7 - 6 MC65 User Guide
Figure 7-4
Enter Passcode
8. Enter the Passcode on the other device. The device is added to the Bluetooth list.
Figure 7-5
Bluetooth Connection Confirmation
The user is prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode
field and tap Next. If the device does not have a specific passcode, enter a passcode in the Passcode field
and tap Next. The Bluetooth radio tries to connect with the device.
9. If the user created a passcode, the user is prompted by the other device to enter the same passcode.
Enter the created passcode to establish a paired connection. (If the user entered a passcode from the
device, the user shouldn’t have to do anything on the other device.)
10. When the connection is complete, a list of matching and supported services on the device appears.
11. Select the services you want to use and tap Finish. The services on the new devices have to be selected
or else the pairing won’t include those services, even though the devices are paired. If services are not
selected, the user is continually reprompted for the passcode from the device.
12. The device appears in the list on the main window.
After the passcodes have been accepted on both sides, a trusted (“paired”) connection is established.
To Next Page
Loading...
