Motorola MC65 User Manual

10 - 12 MC65 User Guide
Cables
This section describes how to set up and use the cables. The cables are available with a variety of connection
capabilities.
The following communication/charge cables are available:
• USB Charging cable
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
• Synchronize information between the MC65 and a host computer. With customized or third party
software, it can also synchronize the MC65 with corporate databases.
• Charge Only cable
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
• Auto Charge cable.
• Provide the MC65 with operating and charging power when used with the Motorola approved power
supply.
Battery Charging and Operating Power
The communication/charge cables can charge the MC65 battery and supply operating power.
To charge the MC65 battery:
1. Connect the communication/charge cable power input connector to the Motorola approved power source.
2. Slide the bottom of the MC65 into the connector cup end of the communication/charge cable and gently
press in until it latches into the MC65.
3. Slide the two locking tabs up until they both lock into position.
Slow Blinking Amber Battery is charging.
Solid Amber Charging complete.
Fast Blinking Amber Charging error.
Table 10-3 Battery LED Charging Indicators (Continued)
LED Indication

Motorola MC65 Specifications

General

Brand	Motorola
Model	MC65
Category	Handhelds
Language	English