Getting Started 1 - 7
First-time Network Activation
GSM/UMTS Activation
Network Activation
To activate on a GSM/UMTS network:
1. If an active SIM card was installed in the MC65, the MC65 performs the activation process.
2. The Phone Network - GSM/UMTS Setup dialog box displays.
3. Tap Yes and then OK. For some carriers, the MC65 resets.
4. If during start-up, no update connection settings message appears, tap Start > Settings > Connection >
Phone Network Setup and tap Update Connection Settings button.
5. If the network is unsupported, a message appears with links for manually setting the data connection and
MMS settings.
To activate on a CDMA network:
1. If a SIM card was not installed, a No SIM card found dialog box displays.
2. Tap OK. The Phone Network - CDMA Activation dialog box displays.
3. Tap Yes to activate on a CDMA network.
4. On the CDMA Setup tab, tap the Preferred network option and select a network.
5. Tap Yes.
6. Tap the Start Activation button.
7. Tap Yes to activate.
8. Call the carrier from an existing phone to request over-the-air activation.
9. When instructed by the operator press Activate Now button.
For detailed information for configuring the phone and activating on a different network, refer to the MC65
Integrator Guide.
Checking Battery Status
To check the charge status of the main battery in the MC65, tap Start > Settings > Power to display the
Power window or tap Status Bar > .
To Next Page
Loading...
Need help?
General
