Motorola MC65 - Bluetooth Configuration; Bluetooth Power States; Suspend; Resume

Using Bluetooth 7 - 3
Bluetooth Configuration
The following services are supported:
• OBEX Object Push Services
• Hands-Free Audio Gateway Services
• Serial Port Services
• Personal Area Networking Services
• PBAP Services
• Dial-Up Networking Services
• HID Client Services
• A2DP/AVRCP Services
• File Transfer profile
• General Audio/Video Distribution Profile
• SIM Access Profile
• Headset Profile
• Generic Object Exchange Profile
• Service Discovery Access profile
• Generic Access Profile.
COM ports COM2, COM3, COM4, and COM7 are available unless being used by another service (MSR uses
COM2).
Bluetooth Power States
Suspend
When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the
active connection.
Resume
When the MC65 resumes, Bluetooth turns on if it was on prior to suspend.
NOTE If there is an active Bluetooth connection between the MC65 and another Bluetooth device and there is
no data activity, the MC65 will timeout. However, if the user presses the Power button on the MC65, the
MC65 will suspend (except when on a call) and upon receiving data from a remote Bluetooth device, the
MC65 will wake from suspend mode. For example, headset redial or Bluetooth scanner sending data to
the MC65.