7 - 4 MC65 User Guide
Turning Bluetooth On and Off
Turn off the Bluetooth radio to save power or if entering an area with radio restrictions (e.g., an airplane). When
the radio is off, other Bluetooth devices cannot see or connect to the MC65. Turn on the Bluetooth radio to
exchange information with other Bluetooth devices (within range). Communicate only with Bluetooth radios in
close proximity.
Enabling Bluetooth
To enable Bluetooth:
1. Tap Status Bar > > Bluetooth > Mode.
Figure 7-1
Bluetooth Mode Tab
2. Check the Turn On Bluetooth checkbox.
3. Tap OK.
Disabling Bluetooth
To disable Bluetooth:
1. Tap Status Bar > > Bluetooth > Mode.
2. Un-check the Turn On Bluetooth checkbox.
3. Tap OK.
Discovering Bluetooth Device(s)
The MC65 can receive information from discovered devices without pairing. However, once bonded, the MC65
and a paired device exchange information automatically when the Bluetooth radio is on.
To find Bluetooth devices in the area:
1. Ensure that Bluetooth is enabled on both devices.
NOTE To achieve the best battery life turn off radios not in use.
To Next Page
Loading...
