ioLogik E2210 User’s Manual Click&Go Logic
5-8
SNMP trap
Select SNMP trap along with a trap number between 1 and 20. You may need to consult with your
network administrator to determine how trap numbers will be used and defined in your network. Click the
memo icon to specify up to 10 IP addresses to receive the SNMP trap. You can also bind the status of up to
three I/O channels within each trap.
E-mail
Select E-mail to send a user-defined email to the specified addresses. Click the memo icon to enter the
desired message and the intended recipients. Dynamic fields such as time, date, IP address, and I/O status
may be inserted in your message by clicking on the Keyword Lookup button.
To add a recipient, you must first add the recipient’s e-mail address to the Available receivers list. You
may then use the finger icons to move e-mail addresses to and from the Receivers list. To edit an e-mail
address, click on the memo icon. Note that the Available Receivers list will already contain a list of names
if you provided the DNS server information in the Network Settings tab. Enter your own e-mail address in
the From Address field.
Under Mail Server Settings, you must configure the IP address of the SMTP server with your username
and password. Since the ioLogik E2210 supports DNS, you may enter the domain name of the SMTP
server.
To Next Page
Loading...
Need help?
General
