3-51FAXING
1
2
3
5
6
7
8
9
10
11
4
FAXING
13
AI
12
Fax forwarding
This feature tells the machine to forward the received document automatically to
another destination. You can set the time period for the machine to perform this
procedure.
NOTE: • Fax forwarding is not compatible with polling documents.
• Fax forwarding is not available with the “Tel Ready” reception mode.
The fax forwarding settings are different depending on your network connection.
• When your machine is connected to the network:
The fax forwarding settings must be configured using a web browser. You can
configure the detailed transfer rule. From the control panel on your machine,
you can toggle [ON] or [OFF] for fax forwarding when the transfer rule has been
configured.
• When your machine is not connected to the network:
You can set the simply fax forwarding rule from the control panel.
The following are descriptions when the machine is not connected to the network.
For details of configuring fax forwarding setting using a web browser, refer to the
“Using a web browser” of the “Network Guide”.
Turning fax forwarding ON or OFF
NOTE: To turn [ON] fax forwarding, you must register at least one transfer rule.
Select [ON] in the fax forwarding setting to switch the individual transfer rules to
[ON]. Faxes will be forwarded according to the registered rules.
1
Press [Setting], [Fax Settings], [Fax Forward], [Setting].
(When your machine is connected to the network)
2
(1) Select [ON] to perform fax forwarding.
(2) Press [Enter].
To Next Page
Loading...
Need help?
General
