7-28 COPYING
Checking the copy print queue
If a job is scanned while another job is printing, that job will be reserved in the copy
print queue.
The copy will be printed based on the order in which it was scanned.
In addition, if the toner or paper runs out while copying, copy reservation can be
used in the same way if the job has not been completed.
1
Press [Setting], [Management], [Next], [Display Jobs in Queue].
2
Press [Reserved Copy].
3
This shows the jobs currently in the queue.
Press [Reset] to return to the standby mode.
To Next Page
Loading...
Need help?
General
