Muratec MFX-1430 - Adding a Text Message to Your E-Mail

5-24 SCANNING
Adding a text message to your e-mail
When you send a document to an e-mail address, a fixed subject and text are
entered automatically. However you can manually enter an e-mail subject line and
text to the transmission.
Editing the subject line and text message
1
Set the document.
2
Press [SCAN] on the control panel.
3
Press [e-mail].
4
Press [Others].
5
Press [e-mail Subject].
NOTE:
You can assign [e-mail Subject] to the soft key. See “Soft keys” on page 10-4.
6
Press [Subject].