14-2 MAINTENANCE & TROUBLESHOOTING
Maintenance
Cleaning tips
To obtain optimal machine performance please follow these guidelines:
• Clean your machine regularly! Dust and dirt, especially around the fax
machine’s air vents can shorten your machine’s life.
• Always unplug the machine before you clean it.
• Never spray any cleaner directly onto your machine. The drifting spray
could damage the components inside.
• Never try to clean sealed areas inside your machine. They are sealed for
both your safety and the safety of your machine.
• When cleaning the machine’s exterior, use a mild cleaning solution sprayed onto a
lint-free cloth.
• In areas you cannot reach with a swab, always use dry, dust-free compressed air
to gently blow away dust and other material.
Cleaning the scanning area
F-560/F-520 model
1
Wipe the ADF glass with a clean, soft, lint-free cloth moistened with water.
2
Then use a clean, soft, dry, lint-free cloth to dry the glass.
MFX-2030/MFX-1430 model
1
Wipe the document glass, ADF glass and document pad with a clean, soft, lint-
free cloth moistened with water.
2
Then wipe it with a clean, soft, dry, lint-free cloth until it is clean and dry.
To Next Page
Loading...
