6-2 REVIEWING OR CANCELING COMMANDS
Reviewing or canceling commands
Your machine can store several “Jobs” in memory. It also keeps track of each com-
mand by assigning it a command number, like “001.”
Delayed commands, redial attempts and current transactions are all stored in your
machine’s memory and given a command number.
Your machine can store up to 100 delayed commands. It identifies each by a three-
digit command number from 001 to 100.
The Review Commands function gives you the power to check on each job (or
command) in your machine’s memory. It also allows you to cancel a fax and e-mail
transmission command.
To review or cancel a command
The operation differs depending on whether or not a document is currently being
transmitted.
1
Press [Fax Cancel/Job Confirm.].
If your machine is attempting to perform a command, proceed to step 5.
NOTE:
For details on canceling the group transmission and/or broadcast trans
-
mission in progress, refer to “Reviewing or canceling parts of a broadcast”
on page 6-4.
2
Press [Delayed Commands].
3
The currently stored command will be displayed.
NOTE:
[BrdCast] will be displayed for group transmission and broadcast transmission.
To Next Page
Loading...
Need help?
General
