6-4 REVIEWING OR CANCELING COMMANDS
Reviewing or canceling parts of a broadcast
You can also review or cancel certain destinations within a broadcast.
NOTE:
When the broadcast command is in progress, you can cancel the destinations
individually. However, you cannot cancel the destinations individually for the
reserved command such as with delayed transmission.
(Reserved documents mixed with fax and e-mail for broadcast transmissions
will have different commands for fax and e-mail respectively. In this case, you
can only cancel one of the commands.)
1
Press [Fax Cancel/Job Confirm.], [Delayed Commands].
2
Select the command you want to cancel.
3
When the broadcast command you have selected is in progress, you can cancel
the destinations individually.
Go to the next step without pressing [Yes].
Otherwise, go to the step 6.
To Next Page
Loading...
Need help?
General
