Muratec MFX-1430 - Printing a List of F-Code Boxes; Printing a List of Documents Stored in F-Code Boxes; Deleting an Empty F-Code Box

10-30 SPECIAL FEATURES
Printing a list of F-code boxes
To print a list of your F-code boxes, press [Setting], [List], [Other Lists], [F-Code
Box], then [Yes].
Printing a list of documents stored in F-code boxes
To print a list of documents stored in F-code boxes, press [Setting], [List], [Other
Lists], [F-Code Doc.], then [Yes].
Deleting an empty F-code box
An F-code box must be empty in order to delete it. (If you select the F-code box
which is not empty, the machine will beep. If this happens, print the documents in
the box prior to deleting it.)
To delete an empty F-code box:
1
Press [Setting], [Fax Settings], [F-Code Box], [Delete].
2
Select the F-code box you want to delete.
3
Use the numeric keys to enter the I.D. code (4 digits) if it has been set.
If an I.D. code has not been set, proceed to step 4.
4
Press [Yes] to delete.
• Press [No] to cancel the deletion.
5
To delete another F-code box, repeat from step 2.
Press [Reset] to return to the standby mode.