EasyManua.ls Logo

Muratec MFX-1430 - Paper Jams

Muratec MFX-1430
396 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14-13MAINTENANCE & TROUBLESHOOTING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
MAINTENANCE & TROUBLESHOOTING
AI
Paper jams
If a paper jam occurs, the following display will appear.
Follow these procedures to clear the paper jam.
If a paper jam occurs during fax reception, the machine will store the received
document into memory and print them automatically once the paper jam has been
cleared.
CAUTION: When you open the side cover to remove the paper, DO NOT touch the fuser
roller. The fuser unit is very hot.
IMPORTANT: Do not touch the drum cartridge surface. Scratches or smudges will result in
poor print quality.
Removing jammed paper
1
Pull the release lever to open the side cover.
If the optional second cassette has been attached, open the 2nd side cover as well.
2
Carefully remove the jammed paper in the direction shown.
NOTE: Avoid getting loose toner on your hands and clothes when removing the
jammed paper.
Jam in the feed area

Table of Contents

Other manuals for Muratec MFX-1430

Related product manuals