10-2 SPECIAL FEATURES
Soft keys
The soft key is a shortcut key. By assigning frequently used functions to a soft key
you can perform instant recall of this feature. The five soft keys can be displayed on
the standby mode.
You can program the soft keys for the copy, fax and scanner displays. Also, the fax
and scanner displays have multiple tabs on the bottom of the display that toggle
between fax, e-mail, folder etc. Each of these tabs can contain its own set of soft
keys.
Example of Copy standby mode
Soft key 1
Soft key 2
Soft key 3
Soft key 4
Soft key 5
Soft key functions
The following table lists the functions you can assign to a soft key.
Copy mode
Function name Descriptions Reference page
Macro Program Use this to perform the macro program. p.10-7
Doc.Type Use this to set the document type and resolution for copying. p.7-8
Contrast Use this to set the contrast for copying. p.7-9
Card Copy *
1
Use this to set the card copy. p.7-25
Zoom Use this to set the magnification for copying. p.7-12
Sort Makes on/off setting for sort copy. p.7-13
Combine Use this to set the combine copy. p.7-14
Duplex Copy *
2
Use this to set the duplex copy. p.7-16
Doc. Size
Use this to select the size of the document to be copied. p.7-27
Bypass Use this to set the paper type on the bypass tray. p.7-11
*
1
: This function is for MFX-2030/MFX-1430 only.
*
2
: The duplex printing unit is required. When the duplex printing unit is not installed, [DuplexScan] will be
displayed.
To Next Page
Loading...
Need help?
General
