4-6 INTERNET FAX FUNCTIONS
Reviewing or canceling commands
For details on the Reviewing Commands feature, see “Chapter 6 Reviewing or
canceling commands”.
Advanced mail functions
The table below lists the advanced functions that can be used in the Fax mode.
To select an advanced mail function:
1
Press [FAX] to display the Fax standby mode.
2
Press [Others].
3
Press [Prev] or [Next] and select the advanced function.
See the page numbers indicated for detailed information.
NOTE: If you regularly use an advanced function you can register that function as a
default soft key, providing instant recall. (See page 10-2.)
Advanced function Descriptions Reference
Mail Address Use this to manually enter an e-mail address. p. 4-2
Mail History Displays a history of manually entered e-mail
addresses (up to 20).
p. 4-4
Re-mail Displays the last e-mail address that you sent
to.
p. 4-3
e-mail Subject Add a subject line and text message to your
e-mail transmission.
p. 4-7
Batch Scan Enable or disable batch scanning. p. 4-11
Check Mail Check for new e-mail documents that have
arrived.
p. 4-12
File Format Select the file format of your attachment. p. 4-13
NOTE:
You can select the following functions when sending an Internet fax. (For
details on the following functions, see “Advanced fax functions” on page 3-23.)
• Broadcast transmission • Address book
• Fax&Copy • Group transmission
• Security reception • TTI select
• Cover page • Transmission report
• Delayed transmission • Scan size
To Next Page
Loading...
Need help?
General
