3-10 FAXING
Changing Document Scan in Mid Scan (Mixed Transmission)
The document glass or the ADF can scan the document. Both scanning devices can
be used in combination, such as for a cover page and map, and transmitted at the
same time.
NOTE:
Basics for scanning the next document
• To scan the next document, set the Next Doc setting to [Yes] while scanning
the current document.
• The ADF’s default setting for Next Doc is [No]. To have the next document
scanned, press [Yes] while scanning the current document.
• For the document glass, the default setting for Next Doc is set to [Yes].
• If you set Next Doc to [No] during scanning, the transmission will begin after
scanning is completed.
ADF
Document glass
1
Set the document in the ADF.
2
(1) Press [FAX] to display the Fax standby mode.
(2) Specify the destination.
• Use the numeric keys to dial the number.
– or –
• Specify the destination using the address book. (See page 2-12)
– or –
• When specifying multiple destinations, use broadcast transmission (See page
3-24.) or call group dialing. (See page 2-14.)
Press [Reset] to cancel the settings.
To Next Page
Loading...
Need help?
General
