6-3REVIEWING OR CANCELING COMMANDS
1
2
3
4
5
6
7
8
9
10
11
13
AI
12
REVIEWING OR CANCELING COMMANDS
4
If you want to cancel a command, select the command you want to cancel.
The confirmation message will appear.
5
Press [Yes] to cancel the selected command. Otherwise, press [No].
NOTE:
•
If the selected command was being transmitted, communication will be can-
celed.
•
You can cancel the destinations for broadcast transmission individually when
the broadcast command in progress (See “Reviewing or canceling parts of a
broadcast” on page 6-4.).
6
To cancel other command, repeat procedures from step 4.
Press [Reset] to return to the standby mode.
To Next Page
Loading...
