Muratec MFX-1430 User Manual

5-8 SCANNING
Registering or editing file names
NOTE: You can register up to 10 file names.
1
Press [Setting].
2
Press [Scanner Settings].
3
Press [File Name].
4
To register a new file name, select an empty key. To edit a file name, select the
desired file name to edit.
5
Enter or edit the file name, then press [Enter].
The name can contain up to 20 characters. Refer to page 5-6 for available char
-
acters.
6
To return to the Standby mode, press [Reset].

Muratec MFX-1430 Specifications

General

Brand	Muratec
Model	MFX-1430
Category	All in One Printer
Language	English