VJ-1624/1624W OPERATION MANUAL 3 Before using
3-83
i. Press the [Enter] key on Operation panel.
• "Adj.1: Confirm" is displayed on Operation panel.
• The display enters the Adjust Print menu.
5.1.1.1.2 Adjust Print menu
3. Press the [Enter] key on Operation panel.
• For VJ-1624, "Warming Up Skip ->E" is displayed on Operation panel.
(This is not displayed for VJ-1624W since it does not perform warming up.)
CAUTION
• While "Warming Up" is displayed, do not touch Platen and Media guide.
They become very hot and you could burn yourself.
NOTE
• You can start printing during warming up.
4.4.7 Starting printing during warming up (VJ-1624 only)
• A confirmation pattern for print quality adjustment is printed.
(VJ-1624 starts printing after warming up is complete.)
To Next Page
Loading...
Need help?
General