VJ-1624/1624W OPERATION MANUAL 5 Panel setup menu
5-15
5.1.1.1.6 Dryer menu (VJ-1624 only)
Sets the temperature of Dryer.
Set to dry the print side after printing.
NOTE
• This function is not displayed for VJ-1624W.
• The set temperature of Dryer differs depending on the media.
5.1.1.1.7 Vacuum Fan menu
Sets up vacuum fan operation.
Setup item Setting Description
Dryer Off / <30ºC> to 50ºC Sets the temperature of Dryer.
1.Roll media
2.Dryer
3.Print head
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
Setup item Setting Description
Vacuum Fan Low Set this if there is a possibility of paper jamming from media
feed failure when the setting is Middle.
Middle Set this if there is a possibility of paper jamming from media
feed failure when the setting is High.
<High> Set when using general media.
— • [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type advanced setup menu
2 3
1
To Next Page
